01 – COMPLETE SERVO SYSTEM VALIDATION
Test the Motor, Drive, and Motion System Together

The 4Q-SMTS platform validates the complete servo system under real operating conditions – including the motor, encoder, servo drive, and control loops. Unlike single-component testers, the 4Q-SMTS measures system performance as it will behave in the field.

Industrial automation and robotic systems depend on servo motors with accurate torque control, dynamic response, repeatability, and thermal stability. Reliable validation of the complete servo drive system is essential before deployment.

Typical Test Applications
  • ■AC servo motors
  • ■Brushless DC (BLDC) servo motors
  • ■PMSM motion-control motors
  • ■Robotic joint actuators
  • ■CNC spindle and feed systems
  • ■Precision positioning systems
  • ■Industrial automation drives
Key Measurements
  • ■Torque and speed
  • ■Dynamic acceleration/deceleration
  • ■Position stability
  • ■Torque ripple
  • ■Encoder feedback validation
  • ■Thermal behavior
  • ■Continuous operation endurance
The servo system performance is not limited to motor capabilities alone – the motor, inverter, and controller must be tested together to predict real-world behavior.
02 – DYNAMIC RESPONSE AND CONTROL LOOP TESTING
Validate Real Motion-Control Performance
Servo Systems Are Defined by Dynamic Behavior

Rated torque alone does not describe a servo system. Real motion-control performance is defined by how the system responds to rapid changes in load, direction, and speed command – and how stable it remains under those conditions.

The 4Q-SMTS regenerative dynamometer enables controlled bidirectional loading while reproducing real machine operating conditions.

  • ■Torque loop response testing
  • ■Speed loop bandwidth analysis
  • ■Position loop validation
  • ■Step-response analysis
  • ■Reversal and direction-change testing
  • ■High-cycle acceleration/deceleration endurance
  • ■Load disturbance simulation
The regenerative dynamometer enables controlled bidirectional loading while reproducing real machine operating conditions – from robotic arm reversal to CNC axis step response.
03 – HIGH-PRECISION SERVO DYNAMOMETER PLATFORM
Regenerative Four-Quadrant Architecture
The 4Q-SMTS system uses a fully regenerative AC dynamometer architecture with precision torque transducers and synchronized high-speed data acquisition. The four-quadrant architecture enables dynamic testing in all operating modes – motoring and generating, in both directions.
Platform Features
  • ■Four-quadrant regenerative operation
  • ■Bidirectional torque control
  • ■Ultra-low inertia configurations
  • ■High dynamic bandwidth
  • ■Encoder and resolver interface support
  • ■EtherCAT / CAN / Modbus integration
  • ■Regenerative energy recovery back to grid
Product Range
ModelPower [kW]Torque [Nm]Max RPM
4Q-0101.51012,000
4Q-02052015,000
4Q-0507.55015,000
4Q-1001110015,000
4Q-2002220015,000
4Q-5006050010,000
The 4Q-SMTS supports both R&D laboratories requiring flexible configuration and production-line validation systems requiring high throughput and automated pass/fail decisions.
04 – AUTOMATED TEST SEQUENCES
Built for Engineering Labs and Production Testing
4Q Software Automation Platform

The 4Q software platform automates servo motor validation and reporting – from single-shot characterization runs in the lab to high-throughput pass/fail testing on the production floor.

Test profiles are defined once and executed repeatedly with full traceability. Every result is logged, timestamped, and exportable in standard formats.

  • ■Automated pass/fail testing
  • ■Continuous endurance testing
  • ■Dynamic profile execution
  • ■Automated thermal soak procedures
  • ■Real-time monitoring and alarms
  • ■Automatic report generation
  • ■Traceable database logging
Export Formats
  • ■PDF certification reports
  • ■Excel data tables
  • ■CSV raw data export
  • ■Customer-specific report templates
Integration
  • ■EtherCAT real-time interface
  • ■CAN bus servo drive communication
  • ■Modbus TCP/RTU factory automation
  • ■REST API for MES integration
The 4Q software platform provides automated, traceable, and production-ready servo motor validation – from engineering laboratories to high-volume manufacturing environments.
05 – MOTOR AND DRIVE EFFICIENCY MAPPING
Map the Full Operating Envelope
Efficiency Across the Torque-Speed Envelope

The 4Q-SMTS platform measures motor and drive efficiency at every operating point across the torque-speed envelope – generating complete efficiency maps that reveal where the system performs optimally and where losses occur.

Efficiency mapping is essential for drive parameter optimisation, control strategy development, and thermal management design. It provides the data engineers need to maximise system performance and reduce energy consumption in the target application.

  • ■Full torque-speed sweep across the operating range
  • ■Motor efficiency, drive efficiency, and combined system efficiency
  • ■Loss separation – copper losses, iron losses, friction losses
  • ■Thermal effect on efficiency at sustained operating points
  • ■Automatic generation of colour-coded efficiency contour maps
  • ■Export to Excel and PDF for design integration
Efficiency mapping with the 4Q-SMTS transforms raw measurement data into actionable design insight – pinpointing optimal operating zones and identifying loss mechanisms across the full working envelope.
06 – INDUSTRIES AND APPLICATIONS
Motion-Control Testing Across Multiple Industries
The 4Q-SMTS platform is deployed globally in R&D labs, qualification labs, and production lines across industries where high-performance servo systems are mission-critical.
Industrial Automation
End-of-line validation and R&D for servo drives in automated production lines and material handling systems.
Robotics
Joint actuator characterization, torque ripple measurement, and dynamic response validation for robotic systems.
CNC Machinery
Spindle and feed axis servo validation for machine tool manufacturers and rebuilders.
Semiconductor Equipment
Ultra-low vibration servo characterization for precision wafer handling and lithography stages.
Packaging Systems
High-cycle endurance and repeatability validation for servo-driven packaging and filling lines.
Medical & Aerospace
Precision actuator validation for medical devices, surgical robotics, and aerospace actuation systems.
The 4Q-SMTS platform enables engineers to validate complete servo-drive systems under real operating conditions – ensuring repeatable motion performance across every application environment.
07 – WHY 4Q-SMTS
Built for Modern Servo Motor Development
The 4Q-SMTS platform combines the precision of a metrology-grade test instrument with the flexibility and automation of a production-ready system. The result is a single platform that serves from early-stage R&D through volume production validation.
Complete System Validation
Motor, drive, and control loop tested together – not in isolation. Real system behavior under real load conditions.
Real Dynamic Load Simulation
Four-quadrant regenerative dynamometer reproduces the actual load profile of the target application.
Precision Low-Inertia Design
Ultra-low inertia dynamometer configurations for high-bandwidth servo systems up to 15,000 RPM.
High-Speed Acquisition
Synchronized multi-channel acquisition captures transient events at the bandwidth servo testing demands.
Automated Reporting
From test execution to signed PDF report – fully automated, traceable, and ready for customer delivery.
Energy Recovery
Regenerative architecture returns energy to the grid – reducing operating costs in high-duty-cycle labs.
From robotic joint actuators to CNC spindle drives – the 4Q-SMTS delivers dynamic performance, precision measurement, and full automation.
Validate Your Servo System with 4Q-SMTS
Turn-key delivery, installation, and commissioning – from bench prototype to production floor.
Related 4Q Testing Platform
The Industrial Automation & Robotics application platform is based on the 4Q-SMTS Servo Motor Test System, designed for precision validation of servo motors, motion controllers, robotics systems, and industrial automation products.


Explore 4Q-SMTS Platform →